For Sale - The Original Made in the USA Honda CT90, CT110 & CT200 Clutch and Headset Nut Tool
As of May 26th of 2021 I am now out of stock of my tool. I am looking into making another batch, but the outfit I use to laser cut my tool has increased their prices significantly to where it may not be worth the effort to continue to try and sell my tools, especially given how cheap the knock off of my tools are coming out of China. I'll update this post if I do end up producing another batch.
I do want to thank everyone who has purchased one of my tools as it has been an enjoyable experience (except for the knock off's from China...) and I hope you have found the tools useful.
As of April 2021 - I have parts in stock here at my link on eBay and now at a lower price of $26.00 plus $5.35 for shipping. I also am including for a limited time, a prototype of my 3D printed valve spring compression tool that you can learn more about at my blog post here at this link.
I have lowered my price and included my valve spring compression tool to compete with sellers from China who have made a knock-off of my tool (which they also make in China) and are now selling them on eBay which kind of sucks. The turkeys are also using the pictures from my eBay listing which I can't do anything about according to eBay which doubly sucks as my own hand is in the pictures.
To compete, I've gone out on a limb and made a larger batch of tools which has enabled me to lower my price and still be able to make here in the USA!
When working on a Honda CT90 two of the most frustrating things can be trying to hold the clutch basket while loosening the nut that holds it on and also loosening the special headset nuts on the front forks. Like most people I have found ways to get the job done and even made a post about using plumbers tape to hold the clutch basket, but I really wanted a nice tool since I plan on working on CT90's as a hobby for a long time, so I decided to design and produce my own.
After a couple iterations, I ended up with the tool design shown in the picture below that works on a CT90 and CT200's in addition to some other Honda models, and I am currently selling them on eBay for $26.00 plus $5.35 for shipping. Here is the link to the listing on eBay.
Here is a picture of the tool being used on a CT200 engine.
Instead of just having the tool be good for holding the clutch basket, I added some openings on the handle and one edge of the tool that can be used to loosen the headset nuts on the front forks of a Honda CT90.
The largest opening on the handle fits the lower headset nut found on most K2 and newer CT90s and fits as shown below.
The smaller opening at the end of the handle fits the smaller upper headset nut on most K2 and newer CT90's in addition to the headset nut found on K0 and most earlier CT90's and fits as shown below.
And last, but not least, I added a feature along the edge of the tool that fits the headset nut on the K1 version of the CT90 and is shown in the pictures below.
Again, if you are interested in picking up one of these tools I am selling them on eBay at this link. I currently am selling these within the USA, but due ship outside the USA using the eBay global shipping program.
Helpful Links (Shop Manuals, Wire Diagram, Model Information, etc.)
After a couple iterations, I ended up with the tool design shown in the picture below that works on a CT90 and CT200's in addition to some other Honda models, and I am currently selling them on eBay for $26.00 plus $5.35 for shipping. Here is the link to the listing on eBay.
Instead of just having the tool be good for holding the clutch basket, I added some openings on the handle and one edge of the tool that can be used to loosen the headset nuts on the front forks of a Honda CT90.
The largest opening on the handle fits the lower headset nut found on most K2 and newer CT90s and fits as shown below.
The smaller opening at the end of the handle fits the smaller upper headset nut on most K2 and newer CT90's in addition to the headset nut found on K0 and most earlier CT90's and fits as shown below.
And last, but not least, I added a feature along the edge of the tool that fits the headset nut on the K1 version of the CT90 and is shown in the pictures below.
Again, if you are interested in picking up one of these tools I am selling them on eBay at this link. I currently am selling these within the USA, but due ship outside the USA using the eBay global shipping program.
Helpful Links (Shop Manuals, Wire Diagram, Model Information, etc.)
Comments
Post a Comment